On average, moving a single-wide mobile home locally costs $3,000 to $8,000, while double-wide moves range from $8,000 to $15,000+ in Phoenix, AZ, depending on distance, permits, and setup requirements. In this guide, we’ll break down typical relocation expenses, key factors that influence pricing, and essential Arizona regulations, so you can plan your move with confidence. Many homeowners start by a Phoenix’s experienced mobile home moving service provider to understand everything from permits to site prep options.
Average Cost to Move a Mobile Home in Phoenix
The cost to move a mobile home in Phoenix can range from $3,000 to $14,000 depending on several key factors:
- Size and Type of Home: Single-wides cost less to more than double-wides or triple-wides. Expect $3,000–$5,000 for single-wides and $7,000–$14,000+ for double-wides.
- Distance: Most local moves within the Phoenix metro area (e.g., Glendale to Mesa or Tempe to Chandler) add minimal distance-based cost. Long-distance moves across Arizona can increase pricing significantly.
- Permits and Compliance: Arizona and the City of Phoenix require specific moving permits and compliance with HUD and ADOT (Arizona Department of Transportation) regulations.
- Breakdown and Setup Services: Disconnection, disassembly, and later reinstallation are separate line items that can each add $1,000 to $3,000.
- Escort Vehicles and Road Clearance: Wide loads often require certified escort vehicles and route planning, especially when passing through dense city areas.
What’s Included in a Standard Mobile Home Move in Phoenix
A full-service mobile home move in Phoenix typically includes:
- Permit Application and Fee Management
- Site Inspection (Departure and Arrival Locations)
- Disconnection of Utilities
- Disassembly of Home (especially for multi-sections)
- Loading, Transportation, and Delivery
- Reassembly, Leveling, and Anchoring at the New Site
Additional services may include:
- Skirting reinstallation
- Tie-down system upgrade or reinstallation
- Foundation or pier adjustments
- Electrical and plumbing hookups
Required Permits for Mobile Home Moving in Phoenix
Before any mobile home can be moved in or out of Phoenix, you must secure the following:
- City of Phoenix Move Permit: Issued by the city’s Planning and Development Department.
- ADOT Oversize Load Permit: Required for all homes exceeding width or height limits.
- County Permit: Maricopa County may also require zoning and septic compliance if moving to a non-park location.
- HUD Label Check: Homes must meet HUD compliance standards to be transported legally.
What are the Key Cost Influencers and Choosing the Right Moving Company
Factors That Influence Mobile Home Moving Costs in Phoenix
Understanding what drives your final bill can help you plan better and possibly save on unnecessary charges. Here are the primary cost influencers:
1. Home Size and Type
- Single-Wide Homes: Easier and cheaper to transport. Often moved as a single unit.
- Double-Wide or Larger Homes: These require splitting and reassembling, dramatically increasing costs.
2. Distance and Access Conditions
- Short Local Moves (0–25 miles): Typically add minimal travel cost, but site access (tight turns, soft ground) can create complexity.
- Long-Distance Moves (25+ miles): Involve mileage charges, possible overnight storage, and more route planning.
3. Age and Condition of the Mobile Home
Older homes may require structural reinforcement or extra caution during the move. Frames and axles must be roadworthy.
4. Terrain and Site Preparation
Sloped or rocky land at the new site might need grading, adding to setup costs.
5. Time of Year
Summer heat in Phoenix can limit moving windows. Winter rain or monsoon season may delay transport and increase costs.
How to Choose a Reputable Mobile Home Mover in Phoenix
With dozens of transport providers in Maricopa County, it’s essential to vet your options. Here’s how:
Look for Licensed and Insured Movers
- Check for Arizona Registrar of Contractors (ROC) license.
- Verify ADOT compliance for oversize loads.
Read Local Reviews and Ask for References
- Search for reviews specific to Phoenix, Glendale, Tempe, or Mesa.
- Ask movers for local client references, especially for complex moves (e.g., double-wide).
Confirm What’s Included in the Quote
A transparent quote should outline:
- Permit fees
- Setup costs at the new site
- Utility reconnection (if offered)
- Insurance for in-transit damage
Ask About Timeline and Guarantees
Reputable movers will give you:
- A realistic timeline with contingencies for delays
- Written guarantees on cost, damage coverage, and reassembly quality
Cost Comparison to Nearby Cities
While Phoenix is the largest city in the Valley, it isn’t always the most expensive for mobile home moving:
| City | Average Local Move Cost | Notes |
| Phoenix | $3,000–$14,000 | Most expensive due to permit complexity |
| Mesa | $2,800–$12,000 | Slightly less costly for permit and inspection fees |
| Glendale | $2,700–$11,500 | Easier road routing reduces escort needs |
| Tempe | $2,900–$13,000 | Higher costs if moving near university zones |
| Chandler | $3,000–$12,500 | Similar to Phoenix due to suburban traffic |
Post-Move Setup Costs, Pro Tips, and Common Questions
Post-Move Setup Costs in Phoenix
Once your mobile home arrives at its new location, there are additional costs you’ll need to budget for:
1. Site Preparation
- Grading and leveling: $800–$2,000 depending on terrain
- Foundation installation (if required): $1,000–$3,500
2. Reconnection of Utilities
- Water and sewer hookup: $500–$1,500
- Electric connection: $400–$1,200
- Gas line reconnection: $300–$800
3. Reinstallation of Skirting and Tie-Downs
Reinstalling quality skirting isn’t just about aesthetics — it protects plumbing and stabilizes temperatures under your home.
- Skirting (vinyl or metal): $800–$2,000
- Tie-down anchors: $500–$1,200
- These elements are essential to meet Arizona HUD code compliance, and often overlap with typical mobile home repair and upgrade costs homeowners face after relocation.
4. Inspection and Certification
Some counties require final inspections to verify compliance before occupancy. These may cost $200–$600 depending on jurisdiction.
Pro Tips to Save Money When Moving a Mobile Home in Phoenix
Plan Moves in Cooler Months
Avoid mid-summer when movers are booked and working conditions are harsh. Spring and fall offer more flexible scheduling and safer weather.
Get Multiple Quotes with Line Item Breakdown
Always compare 2–4 quotes from licensed Phoenix-area movers. Insist on a line-item breakdown to avoid surprise costs.
Bundle Disconnection and Setup Services
Some companies offer discounts if they handle both ends of the move, including disconnection, transport, and reinstallation.
Choose Accessible Locations
A site with easy truck access can cut down crane or winch fees. Avoid tight urban lots or heavily wooded areas if possible.
Frequently Asked Questions (FAQs)
Q: Can I move a mobile home myself in Arizona?
A: No. Arizona law requires licensed and insured mobile home movers to handle the transport. It also involves permits, route planning, and safety compliance that homeowners can’t fulfill solo.
Q: Do I need a new foundation at the new site?
A: Possibly. If the home is moving to a new park, existing pads may suffice. If it’s going to private land, a new foundation or tie-down system is usually required.
Q: What’s the most expensive part of the move?
A: Reassembly, especially for double-wides or older homes. This includes lifting, leveling, and making sure the structure remains sealed and compliant.
Q: How long does the whole process take?
A: Local moves in Phoenix typically take 3–7 days from disconnection to final setup, assuming permits and inspections are pre-arranged.
Final Thoughts
Moving a mobile home in Phoenix, Arizona, involves more than just transport—it’s a full logistical operation with many moving parts. By understanding the costs, legal requirements, and smart ways to plan, you can ensure a smooth, code-compliant, and cost-effective relocation.
Consider working with experienced Phoenix-based mobile home contractors who can handle the full process—from teardown to tie-downs—to save money and avoid costly mistakes.